|
|
|
|
|
|
|
| Pistons | Standard, .20, .40, .60, .80 over |
$150.00
|
| je piston kits, standard compression or 12.8 to one |
$175.00
|
| Engine Kits | |
| 500cc big bore kit piston and gaskets. cylinder needs bored and replated ($175) |
$210.00
|
| cwr 470cc stroker kit, kit includes crank, je piston 94mm and gasket kit,12.8:1comp |
$550.00
|
| cwr 490 cc stroker kit, same as above but 13:1 compression ratio |
$550.00
|
| cwr big 525cc kit, you get the crank,sleeve, piston kit, complete engine gasket kit. cylinder needs to be releeved, we charge $145 for this |
$675.00
|
| add our .435 lift cam and port work and get more hp then you can handle! | |
| CWR complete top end race kit | |
| cwr race piston,topend gasket kit, 4 stainless valves, cam lift of your choice |
$899.00
|
| and valve spring kit, oil and oil filter. add about 11 more hp on non ported head | CWR COMPLETE NATIONAL 450CC RACE MOTOR,call for the goodies, 2004 to 2010 models |
$3500.00
|
| Camshafts by CWR | |
| THESE CAMS PRODUCE REAL POWER, cams that only others wish they had | |
| CWR billet cam, comes with sprocket gear holder and bearing, |
$360.00
|
| .435 Lift extreme mid to top end. works in crf motor | |
| . 420 Lift great mid to top in quad motor | |
| .400 Lift good all around power | |
| the 435 and 420 cams need the cage clearance ground .005 so the lobe can clear | |
| only real race cams need new springs, we have that too. | |
| Valves | |
| Valve Spring Kit with Titanium Caps |
$230.00
|
| Intake and exhaust Valves (Standard Size) stainless priced each, |
$39.50
|
2007 model has different valves, same price |
| valve spring and 4 valve kit special, 423 retail |
$370.00
|
| Carburetors | |
| edelbrock carbs |
$389.00
|
| top end gasket kit |
$65.00
|
| Complete Motor Gasket Kit |
$95.00
|
|
|
Pricing |
| Pro Circuit Complete |
$479.00
|
| Big Gun evo x. complete system |
$400.00
|
| FMF Q2, slip on |
$310.00
|
| lrd pro 4 complete | $525.00 |
| lrd ballistic complete |
$475.00
|
|
$
|
|
| TWO BROTHERS | |
| full race system, head pipe and silencer, for the 04 to 05 models | $495.00 | same for the 06 to 08 models, just different fit. |
| two brothers slip on for the 04 and 05, 06 to 08 |
$299.00
|
| Air Filters | |
| K&N Air Filter |
$35.00
|
| K&N Power Kit |
$120.00
|
|
|
|
| Clutch Accessories | |
| Heavy Duty Clutch Kit (Springs,Steel,Fiber,Plate) |
$90.00
|
| Spring Kit |
$11.00
|
| Sprockets | |
| Front 13 to 16 teeth |
$15.00
|
| Rear 32 to 42 teeth |
$44.00
|
| DID VMX Chain |
$69.00
|
| Urethane Parking Brake Block Off
Plate (Blue, Red, Black, Yellow, Kawasaki Green) |
$10.00
|
|
|
|
| HOUSER A ARMS,colors are red and black only | |
| 04 and 05 long travel arms +2 wide. 0 forward |
$850.00
|
| regular travel +.5 wide 0 forward or +2 wider 0 forward |
$625.00
|
| 04 and 05 slicast a arms |
$999.00
|
| 2004,2005 swing arm +.5 and +1.25,uses stock bearing carrier |
$550.00
|
| 2006 are the same price, just different part. wont fit the 04 and 05 | |
| HOUSER sterring stems,+0.+1+2, gloss black |
$210.00
|
| HOUSER sterring stems,+0.+1+2, chrome |
$299.00
|
| sterring clamps for stems |
$85.00
|
| HOUSER long travel linkage, works only with houser arm |
$345.00
|
| call for other houser goodies | |
| A-Arms with Camber Adjustments these are herrmann products |
$550.00
|
| Swing Arms +1 to +3 |
$650.00
|
| Axle Carrier |
$160.00
|
| Don't see something you need? Contact Us |
 |