Performance Parts for Your MX Bikes
TWO STROKE KITS
KX 60 TO 65 AND RM 65 , COMPLETE MOTOR REBUILD KIT, CRANK,CRANK BEARINGS,COMPLETE GASKET KIT,PISTON KIT,WRIST PIN BEARING,TRANS OIL,SPARK PLUG,ALL IN ONE..............$175.00

80 to 85 cc , complete motor rebuild kit, includes,crank,piston,wrist pin bearing,crank bearings,complete motor gasket kit and trans oil,

CR and YZ kits $185.00 , KX kits $195.00 , RM kits $190.00. MOST YEARS 91 AND UP.
125CC, COMPLETE ENGINE REBUILD KITS, JUST LIKE ABOVE 85CC KITS,
CR 125 1990 TO 2004 $210.00
RM125 AND YZ125 KITS $230.00
KX125,this kit does not include a whole crank, but a rod rebuild kit for the oem crank. $230.00
250cc, CR,KX AND YZ, complete engine rebuild kits, same as the 85 cc kits, $275.00
all pistons are for stock bore. larger sizes available at an addtional cost.

 

HONDA CRF Pricing
CRF 150R  
piston kits, je 12 to 1, 11.5 to 1 compression, stock size or big bore $160
valves, intakes, standard size or 27mm $35 each
valves, exhaust standard size or 23.5mm $35 each
valve guides $12 each
valve spring kit, titainum $205
top end gasket kit $50
CWR race cams,  
345 lift, great mx cam, great pulling power, billet cam $380
380 lift, full topend over rev, great for tt racing,short tracking. billet cam $380
365 lift, great mid range and a good over rev $380
   
CRF250R  
piston kits, standard je or larger bores $180
valves, stainless steel. intake and exhaust, standard or larger $35 each
valve spring kit $210
top end gasket kit $50
complete gasket kit, does not include valve cover gasket $95
cwr crank rebuild, includes heavy duty rod,bearing and labor $185
complete crank shaft $225
+3mm stroker crank, head needs cut back $345
cwr race cam  
350 lift, 256 duration, super strong mid range and a killer topend pull, billet cam with $385
sprocket holder included  
   
CRF450R  
JE PISTON KITS,standard or big bore $180
topend gasket kit $55
complete gasket kit $99
valves, intake and exhaust, standard size, $38
valve spring kit $205
CWR race cams  
    THESE CAMS PRODUCE REAL POWER, cams that only others wish they had
    billet cam, comes with sprocket gear holder and bearing,
$360.00
    .435 Lift  extreme mid to top end. works in trx motor as well,pro type power  
    . 420 Lift  great mid to top in quad motor  
    .400 Lift  good all around power  
    the 435 and 420 cams need the cage clearance ground .005 so the lobe can clear  
   only real race cams need new springs, we have that too.  
 
   
   
   
   

 

KAWASAKI KXF Pricing
   
   
   
   
   
   
   
   
   
   

 

YAMAHA YZF Pricing
   
   
   
   
   
   
   
   
   
   
   

 

SUZUKI RMZ Pricing
   
   
   
   
   
   
   
   
   
   

 

Don't see something you need? Contact Us