|
|
|
|
We
make the LTR a winner!
and far ahead the competition
| Engine Performance Parts | Pricing |
|
CWR PISTON KITS |
|
| CWR TOPEND RACE KIT, PISTON,AND GASKETS FOR A REBUILD,12.8 TO 1 | $240 |
| CWR CAMS ,...........stock is a 338 lift intake and a 373 exhaust | |
| MACH 1 CAM,. 400 lift intake and 390 exhaust. a killer mx cam LOTS OF MIDRANGE WITH A GOOD OVER REV, NEED VALVE SPRING KIT |
$425.00
|
| MACH 2 CAM. full race cams 420 lift intake and 400 lift exhaust. go go go.for power people. EXCELENT TT CAMS SET | $425.00 |
| these are billet cams. i will need your cams to change the sprockets around and decomp | $40 |
| CWR CAM DEAL CAMS OF YOUR CHOICE,SPRING KIT, SAVE $50 | $640.00 |
| 37mm intake valves, stainless | $38.00 |
| 30mm exhaust valves , stainless | $38.00 |
| titainum spring kit | $225.00 |
| TOTAL RACE TOPEND REBUILD KIT | $995.00 | YOU GET THE CWR RACE PISTON, TOPEND GASKET KIT, 4 VALVE SEALS,EITHER MX OR TT CAM,TITAINUM VALVE SPRING KIT, 2 STAINLESS STEEL INTAKE VALVES, AND 2 EXHAUST STAINLESS VALVES. ONE STOP SHOP AND GET IT DONE RIGHT THE FIRST TIME. |
| CWR PRO RACE MOTOR | $3900.00 |
|
this is the complete motor & exhaust package, all labor is included, we disassemble the motor, clean and assemble it. crank rebuild with a heavy duty rod kit, new crank bearings. flywheel mod is done for a quick rev, port work is done to the head and combustion chamber area.cwr 420 cams and springs are used. stainless steel valves are installed.cwr race piston, replate the cylinder for better protection and longer wear.we coat all bearings and trans gear and shifting parts with our cwr slippery stuff for ease of shifting and less hp loss thru motor, you get the updated 3rd gear kit. all oem gaskets are used. as an option we can use a thermal coating on some covers to remove the heat for longer lasting hp.cwr hd clutch is installed. we use the dobeck adjustable computer for tuning in this motor is included, we do an airbox mod with filter kit and top it off with a big gun or barker full exhaust system. the best and biggest bang for the good ole american dollar!!!!!!! |
|
| this is the motor kyle mantua is running and leading the points in 2010 in dist 7 gold series | |
|
this work makes your ltr really hit hard and is for EXPERIENCED riders only |
|
| think you can handle it? | |
| cwr start button/light switch eliminater kit, just one little button is all you need | $40 |
| Exhaust/Intake | Pricing |
|
do beck computer, the best for
adjusting the efi
|
$210.00
|
|
big gun efi controller
|
$300.00
|
|
barker full system,
this is what we use on our race motors only, this reall wakes up the
mods that are done to the ltr
|
$649.00
|
|
big gun slip on, for those that just want a simple
bolt on and go sound
|
$295.00
|
|
big gun exhaust evox, full system
|
$525.00
|
| SHOCKS | Pricing |
|
CWR SHOCK KIT FOR STOCK SHOCKS,
|
|
|
YOU GET TRIPLE RATE SPRINGS FOR THE FRONT. PISTON CHANGE FOR FRONT AND REAR,SINGLE RATE SPRING FOR THE REAR, OIL,NITROGEN AND LABOR. MAKES THESE SHOCKS INTO GREAT MX OR XC SHOCKS WITHOUT THE BIG EXPENCE |
$760.00
|
|
the rear stock spring works well for 160 to 190 pound
rider with this kit, then -$100 for the kit.
|
$660.00
|
|
REPALCEMENT SEAL HEAD FOR STOCK
SHOCK
|
$45
|
|
REPLACEMENT SHOCK BUMPER
|
$25
|
|
stock front shock rebuild, seal head,oil,labor, nitrogen
|
$225.00 set
|
|
stock rear shock rebuild, seal head,oil, nitrogen
and labor
|
$110.00
|
| frame and body | Pricing |
|
NERF BARS
|
|
|
PRO ARMOR FAT PEG WITH HEEL GAURDS
|
$280
|
|
PRO ARMOR SPORT
|
$175
|
|
SWING ARM PLATES
|
|
|
PRO ARMOR
|
$119
|
|
CHASSIS PLATE
|
|
|
PRO ARMOR
|
$99
|
|
FRONT BUMPERS
|
|
|
PRO ARMOR MX
|
$89
|
|
PRO ARMOR RACE
|
$105
|
Prices Subject to Change Without Notice
| Don't see something you need? Contact Us |
 |